BenchTwinOpen BenchTwin

BenchTwin › ESP32 simulator

ESP32 simulator in your browser

Simulate the ESP32 DevKit and the newer ESP32-S3, ESP32-C3 and ESP32-C6 boards with their real pin rules, wire them to real sensors and displays, and test Wi-Fi, Bluetooth and ESP-NOW code before you flash a board.

Open BenchTwin, free
An ESP32 weather station in the BenchTwin ESP32 simulator, with temperature, humidity and pressure sliders and the serial monitor printing readings
The Weather station starter project: a DHT22 and a BMP280 on an ESP32, with sliders to change what the sensors feel.

The ESP32’s real rules

An ESP32 is not an Arduino Uno with more memory, and BenchTwin treats it like the real chip: 3.3 V logic, GPIO 34 to 39 are inputs only, GPIO 6 to 11 belong to the flash chip, the built-in LED is on GPIO 2, and Serial1’s default pins can’t be used. The S2, S3, C3 and C6 have their own GPIO numbers for TX and RX, and Bluetooth only where the chip has it: Classic and LE on the original ESP32, LE only on the S3, C3 and C6, none on the S2.

Wireless, simulated

Sensors, screens and modules

Wire the parts ESP32 projects actually use: BME280, BMP390, SCD40 CO₂, DHT22, MPU6050, VL53L0X and VL53L5CX distance sensors, HX711 load cells, ADS1115, OLED and TFT displays including the 4 inch ST7796S touch screen with TFT_eSPI, NeoPixels, servos, PCA9685 servo boards, relays, LoRa and nRF24 radios, GPS, SIM800L and SIM7600 modems, HC-05 Bluetooth, PN532 NFC and fingerprint sensors. Each one checks its wiring, its address and its supply like the real module.

Test before you flash

The serial monitor shows the same boot lines a real ESP32 prints after a reset, so what you see matches your board. The pin timeline, serial plotter, debugger and oscilloscope show what the code is doing while it runs. When it works, the code goes straight into the Arduino IDE with the ESP32 core.

Questions

Is there a free ESP32 simulator online?

Yes. BenchTwin simulates the ESP32, ESP32-S2, ESP32-S3, ESP32-C3, ESP32-C6 and ESP8266 in your browser, free while it is in beta.

Can I simulate ESP32 Wi-Fi?

Yes. WiFi.h, HTTPClient and MQTT with PubSubClient work against BenchTwin’s simulated network and test broker. The simulation can’t reach real websites.

Can I simulate ESP32 Bluetooth?

Yes. A BLE server with characteristics and notifications works with a phone card in Simulate, and HC-05 / HC-06 modules talk to a Bluetooth terminal card.

Does the simulator know the ESP32’s pin rules?

Yes: input-only pins, the flash pins, 3.3 V logic, the default I²C and SPI pins, and the different GPIO numbers on the S2, S3, C3 and C6.

Can I use MicroPython on the ESP32?

BenchTwin runs Arduino C++ sketches for the ESP32. MicroPython isn’t simulated.

Start for free

More from BenchTwin